Posted on: February 3, 2023 Posted by: admin Comments: 0


In this Deliver Us Mars Chapter 1 Puzzles & Collectibles Guide, we will detail how to solve puzzles and find collectibles in Chapter 1 of the game.

< Getting Started | Chapter 1 Puzzles and collectibles | Chapter 2 Puzzles and Collectibles >

Chapter 1 of deliver us mars details his journey from the earth’s surface into outer space. You will learn some of the basic mechanics such as using the cutting laser and controlling AYLA, her ASE robot.

deliver us mars Chapter 1 Puzzle Solutions

Here are the deliver us mars Chapter 1 Puzzle solutions we have found.

Quick links: Fix the MPT chainring | Enter the meeting with Maria | Prepare for takeoff


Fix the MPT chainring

Chapter 1 begins with you standing on top of an “MPT dish,” a station that receives microwave energy emitted from the moon. It has been damaged and it is up to you to repair it.

Go down towards the ladder in the center of the plate, then down the ladder at the bottom of the catcher. You’ll see two “flow points” ahead: one has a blue lightning bolt and power icon on it, and the other is blocked by some debris.

Use your cutting tool to cut through the debris. Then you will have to go down some stairs and stairs to reach two buildings below.

Deliver Us Mars Chapter 1 Puzzles & Collectibles Guide - Fix MPT Plate 01

Go to the building on the left. The window of the building has three cut points at the bottom; use your cutting laser to cut them open to open the window.

Then head inside the building and you will see a door on the floor with more cut points. Open them and a device with a laser will come out of the ground. Interact with the device and aim the beam at the receiver above the door of the other building.

Deliver Us Mars Chapter 1 Puzzles & Collectibles Guide - Fix MPT Plate 02

Next, head to the other building. Go inside and you will find another laser device.

Point this second device at the reception point on the outside of the building to the left.

Deliver Us Mars Chapter 1 Puzzles & Collectibles Guide - Fix MPT Plate 03

Now that this is done, exit the building on the right and head back to the building on the left.

Move the laser slightly to the left to connect it to the other connection point.

Deliver Us Mars Chapter 1 Puzzles & Collectibles Guide - Fix MPT Plate 04

That’s the end of the puzzle! Your goal is now complete and you can move on. Go downstairs and hop in the truck to drive to the WSA headquarters.


Enter the meeting with Maria

The next big puzzle in Chapter 1 involves Kathy trying to listen in on the meeting with Maria and the other astronauts.

Head down the halls and you will see a vent with three slash points. Cut the tips to open the vent, then climb on.

Go down the stairs and you will see some debris blocking the stairs. Use your cutting laser to open a path and jump over the rubble. At the bottom, you’ll find a large room with two platforms.

Deliver Us Mars Chapter 1 Puzzles & Collectibles Guide - Enter the meeting with Maria 01

Activate the controls on the right to raise the platform off the ground.

Jump down and activate the other platform. It will start moving to the right. Jump on the raised platform, then jump on the moving platform. If you lose the platform, you can return the floating platform with the same controls and try again. Alternatively, you can jump while standing on one of the machines or furniture in the room.

Deliver Us Mars Chapter 1 Puzzles & Collectibles Guide - Enter the meeting with Maria 02

Once you’re on the suspended platform, jump onto the nearby white cylinder and look up. You will see a round grid with four breakpoints.

Use your cutting laser to open the grate.

Deliver Us Mars Chapter 1 Puzzles & Collectibles Guide - Enter the meeting with Maria 03

Then you will have to take control of your Ayla, your ASE robot. Send Ayla to the ventilation shaft and continue; it’s a direct path to a vent that will allow you to listen in on the meeting.

Sit down and wait for the conversation to end. You will then have to proceed through the ducts and around some pipes to listen to the rest of the conversation. Once you get to that point, you will have completed this Puzzle (and the Objective).


Prepare for takeoff

The takeoff preparation puzzle is fairly straightforward. For the most part, you’ll have to flip the switches on the three panels in front of you.

Deliver Us Mars Chapter 1 Puzzles & Collectibles Guide - Prepare for Liftoff 01

The first is the system check. There is a bank of 8 switches at the top of the right panel. They will be called and will light up with a red light. Activate each switch with a red light.

The other astronauts will do some other checking for a few moments; then you will be instructed to do “strong back retraction.” At the top of the left panel is a simple on/off switch with a slider. Press the switch, then drag the slider down.

After a few more checks by the crew, they will be instructed to retract the orbiter’s access arm. Interact with the joystick at the bottom of the center panel. Then move your arm to the right.

Once this is done, you will be immediately prompted to turn on the auxiliary power units. Look at the bottom of the right panel and you will see four sliders. Slide each switch over the lights until the lights turn blue.

You will then be prompted to retract the oxygen gas vent arm. Look again at the left panel – you will see a dial with the number 40 below it. Turn the dial until it reads 0, then slide down the switch next to it. Then you will have to grab the joystick again and move the arm down.

Your next step is to switch to internal power. Look at the panel on the right side – there is a red button with a slider at the top right. Press the red button, then move the slider up.

A few more checks are done, then it’s time to fire up the solid fuel booster. Look to the top right of the center panel and you’ll see a red button with an orange light next to it. Press the red button.

You will hear the engine start and then you will have to rev it up. Interact with the throttle handle below the red button you just pressed and the Zephyr will begin to ascend into space.

It takes a minute or two for the Zephyr to burn out its first engine, so enjoy the view and wait for the first stage of launch to finish.

Once things calm down, you will have to initiate stage 1 separation. Look to the top left of the center panel and you’ll see a sliding handle light up. Slide it down until the line is over the green indicator, then release it.

Next, you will have to turn on the second stage. Look to the top right of the center panel and you’ll see another red button with an orange light next to it. Press this button, then push the throttle stick under it forward again.

You’ll have to wait another minute or so while the second motor works. When you run out of fuel, you’ll need to detach the second stage on the center panel by pulling down on the bottom slider until the white line is over the green indicator.

When the second stage separates, the display will show “Cruise mode activated successfully”. You have completed this Puzzle and are now in space, and at the end of Chapter 1.


deliver us mars Chapter 1 Collectible Locations

Here are the deliver us mars Chapter 1 Collectible locations we have found.

Saving a planet / The WSA Globe

You can find The WSA Globe just outside the WSA headquarters. It’s impossible to miss: it’s the huge golden globe outside the building.

Saving a Planet / Rolf’s Space Suit

You can find Rolf’s spacesuit at the end of the WPA museum in an alcove just before the exit door.

Save a Planet / Mission Team

You can find the mission equipment in a blue box to the left of the elevator before you board the Zephyr spaceship.


< Getting Started | Chapter 1 Puzzles and collectibles | Chapter 2 Puzzles and Collectibles >


That’s the end of the deliver us mars Chapter 1 Guide to puzzles and collectibles. Check out our other guides below!

Further deliver us mars Guides

General guidelines

Puzzles and Collectibles Guides

Leave a Comment